SENMA custom die cut silicone foam sheets are converted into pads, gaskets, insulation pieces and protective inserts to match your drawing or sample. Custom outlines, mounting holes, slots and notches help the finished component fit its installation space in automotive, EV battery and electronic assemblies.
The listed SM1117 material is available in standard thicknesses of 1–20 mm, with grey, black and red color options. Share your part dimensions, application and adhesive requirements so we can review the material and cutting requirements for your quotation.
Key Features and Product Benefits
- Cushioning and vibration control: A flexible contact layer helps cushion components and reduce direct contact in suitable assemblies.
- Thermal insulation: Custom insulation pads can be shaped for selected spaces in battery boxes, inverter housings and electronic enclosures.
- Surface protection: Foam pads provide a contact layer that helps limit rubbing and surface damage between components.
- Adhesive backing options: Backing can be evaluated to suit the mounting surface and installation conditions.
- Flame-retardant options: Specify the required classification, material thickness and supporting documentation for your application.
- Custom fit: Outer profiles, holes and cutouts can follow your drawing rather than requiring manual trimming during assembly.
SM1117 Silicone Foam Sheet Specifications
The following values are the listed specifications for SM1117. Finished die-cut dimensions are defined by your drawing; the standard sheet width refers to the starting material.
| Item |
Specification |
| Model |
SM1117 |
| Material |
Silicone foam |
| Color |
Grey / Black / Red |
| Density |
0.9–1.1 g/cm³ |
| Standard sheet width |
1000 mm |
| Standard thickness |
1–20 mm |
| Hardness |
35–40 Shore A |
| Operating temperature |
-60°C to 210°C |
| Compression stress at 25% |
300–350 kPa |
| Compression set |
≤10% |
| Tensile strength |
≥1.8 MPa |
| Elongation |
≥100% |
| Tear strength |
≥2.5 kN/m |
| Flame retardancy |
UL 94 V-1 (customizable; confirm the selected grade and supporting test documents) |
Confirm the selected material grade, dimensional tolerances, test conditions and supporting documentation before ordering. Adhesive backing, when required, should be assessed for the intended operating conditions.
Custom Die Cutting and Adhesive Options
SENMA works from customer drawings or samples to produce silicone foam components for specific assembly layouts. The design review covers both the foam material and the features needed in the finished part.
- Part geometry: Specify the outer dimensions, shape, corner details and any irregular edges.
- Holes and slots: Show mounting hole positions, cutout sizes and clearance requirements.
- Material and surface: Define thickness, color and whether a smooth or textured surface is required, subject to the selected material.
- Adhesive and installation: State whether a backing is needed and identify the contact surface and operating environment.
Applications for Custom Silicone Foam Pads and Gaskets
- EV battery boxes and modules: Pads, protective inserts, insulation pieces and gap-filling components for selected battery assemblies. Define the temperature, compression, electrical and fire-safety requirements for the installation.
- Inverter housings: Custom foam pieces for internal cushioning, insulation and gap filling around electronic components.
- EV charging stations: Gaskets and pads for component protection, gap filling and suitable enclosure sealing applications.
- Automotive interiors: Contact pads between panels or components to help cushion contact and reduce vibration-related noise.
- Electronic product housings: Protective inserts and foam gaskets with outlines, holes and slots matched to the enclosure design.
For battery projects, see our guide to silicone foam applications in EV battery packs to help define the intended role of the component.
Customization and Quotation Requirements
Send the following details with your inquiry so SENMA can assess the part and prepare a quotation:
- Drawing or sample: A dimensioned 2D drawing, 3D file or physical sample, including critical tolerances.
- Application: Installation location and whether the part is used for cushioning, insulation, gap filling, protection or sealing.
- Material requirements: Thickness, color, surface type, compression requirements and any specified grade.
- Operating conditions: Normal and peak temperatures, contact surfaces and relevant electrical or flame-retardancy requirements.
- Adhesive requirements: Whether a backing is needed, along with mounting and installation details.
- Order details: Sample needs, production quantity and target delivery date.
After the drawing and application review, confirm the material selection, finished dimensions, sample requirements and production details before proceeding.
Frequently Asked Questions
Can you die-cut silicone foam to my drawing or sample?
Yes. SENMA provides custom die cutting based on drawings or physical samples. Parts can include custom outlines, mounting holes, slots and notches. Include dimensions, tolerances and the intended application for review.
What thicknesses are listed for SM1117 silicone foam?
The listed standard thickness range is 1–20 mm, with a standard sheet width of 1000 mm. Specify your required thickness and finished part dimensions when requesting a quotation.
Can the parts have adhesive backing?
Adhesive backing options can be evaluated for the project. Tell us the mounting surface, operating temperature and installation requirements so the adhesive can be reviewed with the foam material.
Can these parts be used in EV battery packs?
Custom pads and gaskets can be evaluated for cushioning, insulation, gap filling and protective applications in selected battery assemblies. Provide the installation location, compression requirements and applicable electrical or fire-safety criteria.
Is UL 94 V-1 listed for this material?
The SM1117 specification lists UL 94 V-1 as a customizable flame-retardancy option. Confirm the selected grade, tested thickness and supporting documents before ordering.
What information is needed for a quote and lead time?
Send a drawing or sample, material and thickness requirements, adhesive needs, quantity and target delivery date. SENMA can then review the design and confirm the applicable pricing, tooling, sample and production details.
Get a Quote for Custom Die Cut Silicone Foam Sheets
Need silicone foam pads, gaskets or insulation parts made to your drawing? Send SENMA your dimensions, thickness, application and quantity to discuss material selection, custom cutting and sample requirements.
Contact SENMA for your custom silicone foam quotation.